Laptop not connecting to Netgear Orbi is a common issue. This problem has stopped them from accessing Orbi login page as well. In case you are amongst them, then it is a great thing that you have come to this article as here we have mentioned the troubleshooting tips through which you will be able to resolve this issue and make your laptop join WiFi once again.
How to Fix WiFi Connection Issue with Netgear Orbi?
1st Solution: Enter the Right Network Password
In case you have used a wireless source of connection to connect the devices, then you might be experiencing the Netgear Orbi WiFi issue because you have entered the wrong network key or WiFi password. How? Here are some reasons:
- You committed typing errors in the entrée.
- The Caps Lock key was left enabled while you were entering the password.
- You tried to access the wrong network using the password of your network.
Irrespective of the cause, it is suggested that you insert the correct password. This means that there should be no typing errors; the Caps Lock key should be disabled, and so on.
2nd Solution: Replace the Damaged Ethernet Cable
If you have made use of an Ethernet cable for the connection between the Orbi router and the laptop, then it is probably not in good condition. So, try this now:
- Make certain that the Ethernet cable has no cuts.
- It should not be old.
- The cable must be properly inserted into the correct ports of the two devices.
After taking care of these points, see if you can connect your laptop or not. In case you are still facing it, then check the ring light. Orbi urple light indiactes internet issues. You may continue reading this article and learn about more ways to fix it.
3rd Solution: Relocate the Laptop
Given that you are still a victim of the trouble, it could be because your router is kept near electronic devices, transmitting appliances, and metal objects.
- Keep the router away from aluminum studs, cordless phones, and treadmills.
- Also, do not keep it near reflexive surfaces like mirrors, glasses, and large water bodies like fish tanks.
We are indirectly suggesting you relocate your networking device so that you can protect its signals from getting interrupted or blocked any further.
4th Solution: Power Cycle Orbi
Technical glitches are also one of the many reasons why users experience technical issues like this. Chances are that you are all messed up in the head because of the same reason.
- In this case, restart your router by turning it off.
- Unplugging the router is required next.
- Count from one to ten.
Once done, do the opposite of the first two steps. Orbi blinking white light means the router is booting up. Wait for the LED light to turn green. It is recommended that you reboot your networking device from scratch in case the LED light named power on the router does not turn green.
Verdict
This ends the troubleshooting guide written on how to resolve the Netgear Orbi not connecting to device issue with ease. In case despite following all the solutions mentioned above, you are still going bonkers because of the issue at hand, then do not think twice before putting the reset process to use. Now the question that might be clouding your head might be how to reset Netgear Orbi? Well, it is quite simple. Simply press the Reset button on Orbi and hold it for some time. The Orbi resets and have the default settings restored. Set it up again and you are good to go.
