A Perfect Guide to Custom Cigar packaging For Producers

What do you do with your cigars? Well, if you’re like most smokers out there, you’ve got some pretty nice humidors that keep your cigars fresh and ready to smoke at a moment’s notice. But the real question here is, are your cigars package the right way? Is their packaging attractive to you? Do you want to start producing cigars on your own, but don’t know where to start with custom cigar boxes, then check out this step-by-step guide on how to create custom cigar packaging:

Getting Start

you’re a cigar producer, there’s a chance that you’re either looking for a new box or have been ask by your distributor if you have one available. If you are in the former category, this post is for you. just pass it on! This guide will go through the basics of what makes custom cigar boxes and then give some pointers on how to find and work with a qualified supplier.

Tips on Picking the Right Wood

Picking the right wood for your custom cigar boxes is one of the most important decisions you’ll make. The wood’s grain, texture, and colour will be the backbone of your final product, so it’s crucial to know exactly what you’re looking for. Here are five factors that every cigar box maker should consider when picking out their wood: 1)      Grain:  The end grain refers to a tree’s growth rings and the direction in which they grow. When looking at wood grains look at them from both sides and try to find a pattern or grain that looks good on both sides. Some people use burls or wavy patterns as well. 2)      Texture: Texture can have an effect on how smooth the custom cigar boxes come out. A smoother wood like mahogany is easier to work with than a rougher wood like oak. 3)      Colour: If you’re going for an earthy tone, then choose red cedar while if you want something lighter brown-toned, then go with spruce. 4)      Preparation Process: Most woods need pre-treatment before working with them such as sanding down any rough spots and applying mineral oil for moisture control and humidity protection against things like cracking and warping over time. The pre-treatment process might not be necessary depending on the type of wood you get, but it’s always worth checking beforehand. 5)      Grain Direction: You want to take into consideration the direction that the grains run when picking out your wood since this will dictate how easy it is to carve.

Tips on Picking the Right Hardwood

Custom Cigar boxes packaging is often made out of a variety of different woods. So you’ll want to take the time to think about what type of wood is right for you. Oak is a popular choice because it’s sturdy and has a nice finish, but other options include mahogany, walnut, teak, red cedar, cherry and more. The type of wood will also determine how much the box will cost: some woods are more expensive than others. With that in mind, you’ll want to think about what types of cigars you plan on storing in your box as well.

Tips on Finishing your Product

When you are done with your custom cigar boxes, it is important to make sure that the product is perfect before you send it out into the world. No one wants their cigars sitting in a box with loose nails or splintered wood. If your cigar boxes are not perfect, then you will have the potential for unhappy customers who will return your product or refuse to buy from you again. Here are a few tips for make sure that your custom cigar packaging is finish properly: 1) Make sure all of the corners are seal and that any rough edges are sand down. 2) If there are any splinters in the inside walls, make sure they’re cut off. 3) Before seal the top of the box shut, make sure everything is line up correctly. 4) Seal all four sides of the box together and use clamps if necessary. 5) Sand down any rough areas on the exterior of your cigar box as well. 6) If you plan on using paint on your boxes, make sure that you don’t forget to prime first so that it lasts longer.

Packaging and Shipping

  If you are planning on using custom cigar boxes for your product, there are a few things that you need to know before finalizing your decision. If the box is going to be shipp, we would recommend having some sort of packaging inside of it in order to protect the cigars from being crush during transit. It is also good practice not to put any adhesive labels or stickers on the outside of the box so that it can be return if needed.